Firmware update - Easylux

Bootloader procedure

STEP 1: TRANSFER SOFTWARE

Conect the MiniReflecto to the computer by USB cable.
Run the Transfer Software
Open the firmware file MINI_REV0053.cyacd

 

STEP 2: MINIREFLECTO UPDATE

Press and Hold the Minireflecto YELLOW button
Keep the Yellow button pressed and then Press and Hold the Minireflecto POWER ON button.
Wait the MiniReflecto turns the screen light on.
Keep the POWER ON button pressed and now RELEASE the Yellow Button.
Wait while the Transfer Software finds the MiniReflecto (about 10 s)
Start the transfer pressing the transfer button.
Keep holding the power button and then wait for the transfer end.

 

STEP 3: TouchScreen Calibration

Power on the Instrument pressing the POWER ON button
Just a second after Instrument starts Press and Keep pressed the Yellow button.
Wait the MiniReflecto shows the TOUCH CALIBRATION screen
Follow the instructions on the instrument screen

Translate »
BrazilUSASpain